List of storage features
WARNING
|
Glove box
Push the button to open the glove box.
The glove box light turns on when the engine switch is in ACCESSORY or IGNITION ON mode.
Console box
Push the knob.
â– Console box tray
The tray can be removed.
â– Console box light
The console box light turns on when the engine switch is in ACCESSORY or IGNITION ON mode.
Bottle holders
Front
Rear
WARNING
Do not place anything other than a bottle in the bottle holders.
Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury. |
NOTICE Put the cap on before stowing a bottle. Do not place open bottles in the bottle holders, or glass or paper cups containing liquid. The contents may spill and glass cups may break. |
Cup holders
Front
Rear
Pull the armrest down.
WARNING
|
Auxiliary boxes
Type A (if equipped)
Push the lid.
Type B
Pull the armrest down.
Type C
Opening: Push the tray forward until it locks.
Closing: Push the tray forward to release the lock and the tray will automatically close.
â– When small items are placed on top of the tray (type C)
The tray can be opened while small items are placed on it.
WARNING â– Items unsuitable for storing (type A) Do not store items heavier than 0.4 lb. (0.2 kg). Doing so may cause the auxiliary box to open and the items inside may fall out, resulting in an accident. |
NOTICE â– When opening or closing the tray (type C)
|
Open tray
WARNING
Do not store items in the tray that can easily shift or roll out.
Failure to do so may cause items to be thrown out of the tray in the event of sudden braking or steering. In these cases, the items may interfere with pedal operation or cause driver distraction, resulting in an accident. |
Trunk features
Grocery bag hooks
NOTICE To prevent damage to the hooks, do not apply too much load to the hooks. |
Cargo net
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Sfi System: MIL Circuit. EVAP System Tank Vapor Line Restricted/Blocked (P00FE00). Low Pressure Fuel System Pressure - Too Low (P008A00)
MIL Circuit DESCRIPTION The Malfunction Indicator Lamp (MIL) is used to indicate vehicle malfunctions detected by the ECM. The MIL operation can be checked visually. When the engine switch is first turned on (IG), the MIL should be illuminated and should then turn off after the engine is started. If ...